Early style jumper to be used with Type 1&2 connectors below

Later style Isat type connector. Use wiring to left just change the spade connector to isat style plug.(Don't forget the fuse)Isat style

Type 1 connector 900

Isat style(900)

9000 connector located on drivers side engine dept.type 2 con.

Isat style(900 conv)

Back to flash code retrieval
(This article is meant only to educate a consumer,or a guide line for professionals. You can cause serious damage to your vehicle and/or cause yourself injury. Only those qualified should attempt repairs. I do my best to assure that the above info is correct but take no responsibility for any damages incurred.)
Home - Email